Tips interior: Various ceramics and how to choose ceramic suitable our home style.
February 24, 2011
Various ceramics were in the market. From the measurement to his kind. Let’s see all about the ceramics. The ceramics was present with many choices of the measurement, the color as well as the motive. The measurement of the standard that often was experienced by us in the market in part, 20x20cm, 30x30cm, 20x25cm, 25x33cm, 33.3x50cm, 32.5x49cm, 32.5×65.6cm, 33.3×33.3cm, 45x45cm, and 33.3×66.6cm. The measurement that varies could help many owners of the house explored. At first so that the use of the ceramics could give many ideas and agrees with the measurement of the room. Moreover also so that the waste of ceramics not too many, so as to cause a loss to his user.
Although the waste of development project could not be avoided. However with many this measurement, most did not make the owner of the house or the contractor could have the measurement that in accordance with the requirement. At first again apart from the matter of the measurement, the producer of the ceramics also made various motives that were dynamic, attractive, and had the art taste. Along with this was sent by us several ceramic kinds had a basis the process of his production, the character of the surface, and resistance. This classification could in part help us to choose the ceramics that in accordance with the allocation.
According to the process of the formation:
• Extruded, that is the process making ceramics by means of wetting materials before. Afterwards was rolled until soft, was pressed through the edition/the gap through to have the shape of long that joined the process of the reduction.
• Powder pressed, that is the process make the ceramics, that after materials were mix water, was carried out the mill. After being made powder (the powder) with the system spray drying, was pressed in the high pressure on the edition.
According to the surface:
• Glazed ceramic, that is the ceramics that polished.
• Unglazed ceramic, that is the ceramics that his surface not polish glassier. According to the process of the burning:
• Single firing, that is the process where the ceramics was printed then was given by the layer glassier or decors, then was burnt to become the end product (finished good).
• Double firing, that is the process of the ceramics that was printed then was burnt, afterwards was given by the layer glassier, was burnt again in the temperature was lower.
According to resistance (especially for the floor)
: • Class I, that is the floor that was passed through by the person with the soft footwear or without the footwear, without being waste bathed the house, the bedroom that the entry road indirectly from outside the house.
• Class II, that is the floor that was passed through by the person with the soft footwear or normal. sometimes had few frictions that hard-example: family room the guest, and other space that often was passed through by the person except the kitchen.
• Class III, that is the floor that often was passed through by the person with the normal footwear. There were few frictions that hard-example: the kitchen, the corridor, the balcony, the terrace.
• Class IV, that is the floor with the normal traffic, with the hard-example friction: commercial, the hotel, exhibition space, the road to enter.
• Class V, that is the floor with passage the pedestrian who in the certain period received the hard-example friction: shopping center, the airport, foyer the hotel, the area pedestrian, the area of the industry.
Comments
Got something to say?
